Windows XP Networking Tutorial: Wireless Network Configuration Tips Getting Started with Windows Connect Now Joseph Moran
Getting Started
The first step to using Windows Connect Now is to run the Windows XP Wireless Network Setup Wizard, which you'll find in the Windows Control Panel. When you launch the wizard for the first time you'll be prompted to enter an SSID for your wireless network and choose whether you want to have Windows automatically create an encryption key or manually assign one yourself. Before clicking Next, be sure to check the box labeled Use WPA encryption instead of WEP.
If you allow the wizard to generate your encryption key, it will create one using the maximum allowed length. But if you decide to use your own, make it as long as allowed and the characters as random as possible, because when it comes to WPA keys, longer means stronger.
As you proceed through the wizard you'll be given the option to save the data to a USB flash drive (the default choice) and you'll have to specify the drive letter that corresponds to your USB device. Once you've done that and clicked Next, leave the wizard open, remove the USB device, and plug it into any other XP SP2 system you want to configure. When the pop-up menu appears on the second XP SP2 PC, select the first option — to run the Wireless Network Setup Wizard — and then confirm that you want to add the system to your WLAN. Then remove the USB drive and repeat the process on any additional systems or devices.
Note that if you use plug your USB key into a non-PC but still WCN-compatible device, it will generally flash a staus LED three times to indicate that it's been successfully configured. (Some additional steps are required with the Xbox 360 — for details consult xbox.)
Once you've finished configuring all your systems and/or devices, plug the USB drive back into the original XP system you started at. (You'll see the same pop-up menu, which you can dismiss or use to configure that system if you haven't already done so.) Return to the Wireless Network Setup Wizard and click Next, and you'll see a list of the systems and/or devices you've configured.
You'll also see a button labeled Print Network Settings — it's certainly not a bad idea in this case to use the button to make yourself a hard copy. The printed record (kept appropriately secured, of course) can come in handy as a reference to manually configure devices that don't support Windows Connect Now.
By default, there should be a check in the box next to "For security reasons, remove network settings from my flash drive." It's best to leave this option selected and delete the data than to leave your wireless security information on a device that can easily be misplaced and fall into the wrong hands. Remember, as long as the network settings are present on the flash drive, it will offer to use them to configure any WCN-compatible device it's plugged into.)
However, the good news is that even if you delete the settings, you won't need to re-enter the information if you ever decide you need to use the Wireless Network Setup Wizard again. The next time you run the wizard (from the original system, of course) you'll have the choice to either set up a new network or to add additional devices to your existing one. Your original SSID and encryption key information is retained by the wizard, so if you choose the latter, the information can automatically be re-copied to your USB device.
